< advice / From steel to semiconductors: which engineering skills transfer across South Wales industries

From steel to semiconductors: which engineering skills transfer across South Wales industries

Author: IntaPeople | Date published: 19/11/26

Engineer in a hard hat and hi-vis jacket reviewing a clipboard beside industrial robots in a South Wales manufacturing facility

South Wales has always been an engineering region. For generations that meant steel, coal and heavy manufacturing. Today, the same stretch of the M4 corridor is home to one of the world’s leading compound semiconductor clusters, a growing renewables and defence supply chain, and a steelworks in the middle of a major rebuild.

That shift raises a practical question for engineers: if your experience is in one industry, how much of it carries over to another? The short answer is more than most people think. Here’s where the overlap is strongest, where the gaps are, and how to make the move.

Why this matters in South Wales right now

Two big changes are happening side by side.

At Port Talbot, Tata Steel UK is building a 3.2 million tonne electric arc furnace, due to be commissioned in late 2027 or early 2028. Ironmaking stopped in October 2024, and the company’s direct workforce is set to fall to around 5,000. Some steel engineers will stay for the new process, while others are weighing up where their skills could take them next.

Meanwhile, the compound semiconductor cluster around Newport, Cardiff and Swansea keeps growing. An independent report from Cardiff University’s Welsh Economy Research Unit found the cluster supported 3,140 jobs in Wales in 2025, up 14% on the previous year, with an average salary of around £66,000. The cluster’s own skills leads say growth in cleanroom operations, process engineering and advanced manufacturing will need a significant increase in training capacity.

In other words, one sector is reshaping its workforce while another is short of people. That’s exactly where transferable skills become valuable. (For a wider view of demand, see our article on which sectors are hiring the most engineering staff in 2026.)

The engineering skills that transfer best

1. Quality, statistical process control and root cause analysis

SPC, Six Sigma, 8D, FMEA and structured problem solving are used across steel, automotive, aerospace, medical devices and semiconductors. Engineers who can show measurable improvements in scrap rates, defects or right-first-time output are attractive in almost any manufacturing environment.

2. Electrical and instrumentation engineering

High-voltage systems, power distribution, drives, sensors and instrumentation sit at the heart of heavy industry. The same knowledge is needed to run cleanroom facilities, power-hungry tools, renewable energy assets and the electric arc furnace itself. E&I engineers are among the most portable people in the region.

3. Controls and automation

PLCs, SCADA, DCS and industrial networking are used everywhere from rolling mills to wafer fabs and food production. Experience with Siemens, Rockwell or similar platforms is valued well beyond the sector you learned it in, including across the UK and European contract market.

4. Maintenance and reliability engineering

Planned and predictive maintenance, condition monitoring and asset reliability skills keep any high-value production line running. In semiconductors, where tool downtime is extremely costly, reliability engineers who understand data-led maintenance are in demand.

5. Health, safety and environmental management

Heavy industry builds a strong safety culture. Experience with permits to work, COMAH or hazardous processes, and environmental compliance transfers well to chemical-heavy environments such as semiconductor fabs, as well as to energy and infrastructure projects.

6. Facilities and utilities engineering

Cleanrooms rely on precise control of air handling, ultra-pure water, gases and power. Engineers who have managed large utilities systems in steel or chemicals often adapt quickly to facilities roles in high-tech manufacturing.

Where the gaps usually are

Transferable doesn’t mean identical. Moving from steel into semiconductors (or the other way) usually means learning some new areas:

  • Contamination control and cleanroom protocols: working to particle-level standards is a big cultural shift from heavy industry.
  • Materials science and device physics: you don’t need a PhD, but a working understanding of compound semiconductor materials and processes helps you contribute faster.
  • Scale and pace: semiconductor processes involve many small batches and frequent recipe changes, rather than long continuous runs.
  • Specialist design skills: roles such as IC design or microelectronics usually need specific qualifications and are harder to move into without retraining.
Skill area How well it transfers What to add
Electrical and instrumentation Very well Familiarity with the new site’s tools and systems
Controls and automation Very well Exposure to other PLC/SCADA platforms
Quality and SPC Very well Sector standards (e.g. ISO 13485, IATF 16949)
Maintenance and reliability Well Precision equipment and cleanroom working
Health, safety and environment Well Chemical and gas handling regulations

How to make the move: practical steps

  1. Translate your CV. Swap site-specific jargon for language any manufacturer understands. “Reduced slab defects by 12% using SPC” says more to a semiconductor hiring manager than a list of plant names. Our guide on making your CV stand out can help.
  2. Lead with outcomes. Yield, uptime, safety record, cost savings and project delivery are universal measures. Quantify them wherever you can.
  3. Close the knowledge gap. Short courses in cleanroom practice, semiconductor fundamentals or a new controls platform show intent. Cardiff University’s Pathway into Semiconductors programme, a free three-day course aimed at engineers moving in from other sectors, is a good example of what’s available locally.
  4. Be open to a sideways step. A role at the same level in a new industry can lead to faster progression later, especially in a sector that is growing and short of experienced people. We’ve written before about why mid-level talent is so sought after in semiconductors and MedTech.
  5. Prepare for technical interviews. Expect questions that test how you’d apply your experience in an unfamiliar setting. Have two or three examples ready that show how you solved problems, not just what equipment you used.
  6. Consider contracting. Automation, E&I and commissioning skills are in demand across the UK and Europe. Contract work can be a good way to build experience in a new sector before committing to a permanent move.

How IntaPeople can help

IntaPeople is a specialist engineering and technology recruitment agency based in Cardiff. We work with manufacturers, semiconductor and electronics businesses across South Wales, so we know how skills translate between industries and which employers are open to people making the switch.

We’ll help you reposition your CV, introduce you to roles you won’t always see advertised, and give honest advice on salary and timing, whether you’re looking for a permanent role or contract work across the UK and Europe. Browse our latest engineering jobs or get in touch with the team for a confidential conversation.

FAQs

Can a steel industry engineer move into semiconductors?

Yes. Quality, E&I, controls, maintenance and HSE skills all transfer well. Most people need some extra learning on cleanroom practice and semiconductor processes, which can often be picked up through short courses and on-the-job training.

Which engineering skills are most transferable between industries?

Electrical and instrumentation, controls and automation, and quality/SPC skills tend to transfer most easily, because the principles and often the systems are the same across sectors.

Do semiconductor roles in South Wales pay well?

The compound semiconductor cluster reported an average salary of around £66,000 in 2025, well above the Welsh average, although pay varies by role and experience.

Do I need a degree to work in semiconductors?

Not always. Design and research roles usually need a relevant degree, but many technician, maintenance, facilities and production roles value practical experience and qualifications such as HNCs and apprenticeships.

Sources

< advice / From steel to semiconductors: which engineering skills transfer across South Wales industries